BMCJW - ACRYLIC LATEX ENAMELIZED HOUSE PAINT, W2500

  • MSDS: BMCJW
  • Manufacturer: AMERITONE PAINT CORP
  • Product Name: ACRYLIC LATEX ENAMELIZED HOUSE PAINT, W2500
  • National Stock Number: 8010-00N024158
Product Identification

Product ID:ACRYLIC LATEX ENAMELIZED HOUSE PAINT, W2500
MSDS Date:11/20/1987
FSC:8010
NIIN:00N024158
MSDS Number: BMCJW

Responsible Party
AMERITONE PAINT CORP
18414 S SANTA FE AVE
COMPTON, CA 90221
US

Emergency Phone: 213-639-6791

Info Phone: 213-639-6791

Cage: FO133

Contractor
AMERITONE PAINT CORP/COMPTON, CA 90221
190 LONG BEACH, CA 90801 US

Telephone: 310-639-6791

Cage: FO133

Ingredients

WITH THIS PROD. FOLLOW RESP MFR DIRECTIONS FOR RESP

RTECS: 9999999ZZ


ON SURF COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 0-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


0.1 @ 70F. LEL

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: 5-10%


11.9 @ 68F

CAS: 1336-21-6

RTECS: BQ9625000

Fraction By Weight: <1%

OSHA PEL 35 PPM STEL

ACGIH TLV: 25 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


DIATOMACEOUS EARTH

CAS: 68855-54-9

Fraction By Weight: <1%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


0.62

CAS: 25265-67-7

Fraction By Weight: <5%


MERCURY, (ACETATO) PHENYL; (PHENYLMERCURIC ACETATE)

CAS: 62-38-4

RTECS: OV6475000

Fraction By Weight: <1%

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


ATTAPULGITE; (ATTAPULGITE CLAY)

CAS: 12174-11-7

RTECS: RT6400000

Fraction By Weight: <1%


SANDING DUST. WHEN USED IN RESTRICTED VENT AREA,

RTECS: 9999999ZZ


TO REMOVE A COMBINATION OF PARTICULATES & VAP. WHEN

RTECS: 9999999ZZ


SUPPLY RESP/HOODS. USE NIOSH/MSHA APPRVD RESP WHEN

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) INHAL: IRRITATION OF THE
RESPIRATORY TRACT; HDCH, NAUS, DIZZ. SKIN/EYE: PRIMARY IRRITATION.
(CHRONIC) PROLONGED AND REPEATED BREATHING OF SPRAY MIST AND/OR
SANDING DUST OVER A PERIOD OF YEARS MAY CAUSE DUST DISEASE OF THE
LUNGS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. EYES: FLUSH IMMEDIATELY WITH
LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. CALL MD FOR MEDICAL
TREATMENT. SKIN: REMOVE WITH SOAP AND WATER. REMOVE SOILED
CLOTHING. INGEST : DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DO NOT
INDUCE VOMITING. CALL MD IMMEDIATELY. TREAT SYMPTOMATICALLY.

Fire Fighting

Flash Point:NONE
Lower Limits:SEE INGRED
Extinguishing Media:IN CASE OF FIRE USE CO*2, DRY CHEMICAL, FOAM OR
OTHER NFPA APPROVED METHOD FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.SUMMON PROF FIREFIGHTERS.WATER SPRAY MAY BE INEFT.IF WATER IS
USED,FOG NOZZ ARE PREF.IF EXPSD (SUPP DATA)
Unusual Fire/Explosion Hazard:DUE TO PRESS BUILD-UP, CLSD CNTNRS EXPSD
TO EXTREME HEAT MAY EXPLODE.DURING EMER CNDTNS,OVEREXP TO DECOMP
PRODS MAY CAUSE HLTH HAZ.SYMP MAY NOT BE (SUPP DATA)

Accidental Release

Spill Release Procedures:WASH WITH WATER. BEFORE ATTEMPTING CLEAN-UP,
REFER TO HAZARD CAUTION INFO IN OTHER SECTION OF MSDS. CONTAIN
SPILLED MATERIAL AND REMOVE WITH INERT ABSORBENT. STORE IN CLOSED
CONTAINER UNTIL PROPERLY D ISPOSED OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE BELOW 110F & KEEP FROM FREEZING.
KEEP CNTNR CLSD WHEN NOT IN USE. DO NOT REUSE EMPTY CNTNRS. DO NOT
TRANSFER CONTENTS TO BOTTLES/UNLAB CNTNRS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. DO NOT BREATHE VAPORS,
SPRAY MIST OR SANDING DUST.

Exposure Controls

Respiratory Protection:WHEN SPRAY APPLIED IN OUTDOOR/OPEN AREAS
W/UNRESTRICTED VENT & DURING SANDING/GRINDING OPER USE NIOSH/MSHA
APPRVD MECH FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF
OVERSPRAY & (ING 8)
Ventilation:USE ONLY W/ADEQ VENT.PROVIDE GEN DILUTION/LOC EXHST VENT IN
VOLUME & PATTERN TO KEEP AIR CONC Protective Gloves:NOT REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
FIRE FIGHT PROC: TO FIRE/EXTREME HEAT, WATER SHOULD BE USED TO COOL
CLSD CNTNRS & PVNT PRESS BUILD-UP/POSS AUTO-IGNIT. EXPLO HAZ: IMMED
APPARENT. CALL MD. VENT: SAFETY & HLTH STANDARDS IN MIXING, APPL
ICATN & CURING AREAS & TO REMOVE SANDING DUSTS OF DRIED COATING &
DECOMP PRODS DURING WELDING & FLAME CUTTING (ING 12)

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>212F,100C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.05-1.31
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:65-70

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE HAZ FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CO, CO*2, NO*X.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.